Your cart is currently empty
Easy power transmission and ski control at high speeds are just two of the benefits of the Veloce 110 GW with 100 mm last and dual injected racing PU shell.
Easy power transmission and ski control at high speeds are just two of the benefits of the Veloce 110 GW with 100 mm last and dual injected racing PU shell. It is also comfortable to wear and easy to get on and off. It is slightly softer at the top to make entry easier, and harder at the bottom for precise, dynamic ski control. This together with a Hyperlight cuff, wide power strap and optimum combination of flex and hardness means the boot gives the foot perfect support. Contour 5 technology means the shell and liner adapt to the shape of your foot, eliminating pressure points. Your boot fitter can also modify the shell to your foot with minimal effort. The same applies to the sole plate, which can be used to change the lean angle. Padding in the Contour 5 IF liner provides firm support at the heel and even pressure distribution. An insulating footbed and welded seams help retain heat, even on really cold days. The liner and shell can be adjusted separately to your foot, thanks to MyFit technology. GripWalk soles fitted as standard make walking easier and less slippery.
Cuff Material | DB Hyperlite |
---|---|
Construction | Overlap |
Last (mm) | 100 |
Shell Material | PU |
Strap | Power strap 40 mm |
ISO | ISO 23223 |
Buckle | V22 |
Flex | 110 |
Liner | VELOCE IF |
Fit System | MyFit |
MONDO POINT | 22 | 22.5 | 23 | 23.5 | 24 | 24.5 | 25 | 25.5 | 26 | 26.5 | 27 | 27.5 | 28 | 28.5 | 29 | 29.5 | 30 | 30.5 | 31 | 31.5 | 32 | 32.5 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
USA MAN | 4 | 4 ½ | 5 | 5 ½ | 6 | 6 ½ | 7 | 7 ½ | 8 ½ | 8 ½ | 9 | 9 ½ | 10 | 10 ½ | 11 | 11 ½ | 12 | 12 ½ | 13 | 13 ½ | 14 | 14 ½ |
USA WOMAN | 5 | 5 ½ | 6 | 6 ½ | 7 | 7 ½ | 8 | 8 ½ | 9 | 9 ½ | 10 | 10 ½ | 11 | 11 ½ | 12 | 12 ½ | 13 | 13 ½ | 14 | 14 ½ | 15 | 15 ½ |
Note: We highly recommend heading into your local ski shop to try on any boot before purchase. All ski boots fit differently and your size is just the first consideration of many to get an ideal fit.
Ski and Snowboard boots should feel comfortably snug everywhere—heel, instep, and toebox. Your toes should be barely touching the front edge. If a boot fits "just right" out of the box, chances are it will be too big when the boot breaks in. Specifically as the heel pocket breaks in your foot pulls away from the front edge of the boot, allowing for some toe wiggle room. It usually takes 4-8 times riding to break in your boots. Or, for many boots, you can have them heat molded at a shop to simulate the break in process.
Ski and Snowboard boots are designed to fit when you are using them on the slopes, not when you are walking around. Look at your boot from the side. Notice the way the entire boot leans forward. This shape will force your foot forward when you stand up straight, causing your toes to hit the front of the boot. However, when you bend your knees and get into your performance stance, your foot moves back into the proper position for riding. Your toes will leave the front of the boot as your heel sinks into the heel pocket.
We mean your actual shoe size. More often than not, when we ask someone their shoe size before measuring their foot they tell us anywhere from a half size to two sizes bigger than their actual measurement. A half size bigger in your favorite pair of sneakers isn't a big deal, but ski and snowboard boots need to fit snug everywhere for proper performance, and to prevent foot pain, blisters and cold feet. Yes, boots that are too big can cause cold feet. Over-tightening buckles to compensate for a big boot can cut off blood flow, causing cold feet.
Do NOT use cotton socks. Cotton retains moisture which causes blisters and cold feet. We suggest a wool/synthetic blend, however, 100% wool or 100% synthetic socks work well too. Ski/Snowboard socks are specifically built to add support and comfort.
Product carousel items